What
to do if you believe someone has had, or is getting, an electric shock
It may not be immediately clear that someone is getting an electric shock. Smoke won’t be pouring from their ears! If you think someone is suffering from electric shock, approach with extreme caution.
It may not be immediately clear that someone is getting an electric shock. Smoke won’t be pouring from their ears! If you think someone is suffering from electric shock, approach with extreme caution.
The
first step is
to separate the person from the source of electricity as quickly as possibly.
The best way of doing this is to turn off the supply, for example by unplugging
the appliance or by turning the mains off at the fusebox (consumer unit).
If this isn’t possible, then try to remove the source of
electricity from the person using a piece of insulating material, such as a
length of wood.
NEVER
touch the person receiving the electric shock, or you could suffer one too.
After
removing the person from the source of electricity, if the person is unconscious call
for an ambulance immediately. Only those with the necessary knowledge and skill
should carry out first aid.
Where
the person is conscious and
seems well, it is still advisable to monitor their condition, as the effects of
an electric shock may not be immediately obvious. In worst case conditions, an
electric shock may lead to a condition known as electroporation, where cells
within the body rupture, leading to tissue death. Additional problems might
include deep-seated burns, muscle damage and broken bones.
Use
an RCD. Using an RCD will help to protect you from dangerous electric
shocks. Although not a guarantee of absolute safety, it limits the time current
can flow through the body if a person comes into contact with a live source of
electricity.
We strongly recommend that anyone using electrical appliances in
the garden ensures that they are protected by an RCD, preferably one fitted in
the main household fusebox (consumer unit).
Alternatively, a dedicated RCD-protected socket or a plug-in RCD
should be used
No comments:
Post a Comment