Electrical Engineering projects in Power Systems--part6

Neural Network Based Predictive Control of a Heat exchanger Non Linear Process 

 Analysis of the impact of Distributed Generation of Automatic Reclosing 

Unbalanced Three-Phase Distribution System Load-Flow Studies Including Induction Machines 

Power Flow Control in a Distribution System Through an Inverter Interfaced Distributed Generator 

A simple Circuit-Oriented model for predicting six-phase induction machine performances 

Optimization of Network Configuration in Large Distribution Systems Using Plant Growth Simulation Algorithm 

Load Balancing for Distributed and Integrated Power Systems using Grid Computing 

A New Approach to Compensation of Extra High Voltage Transmission Lines 

Permanent Magnet Synchronous Machine Hybrid Torque Control 

Improving the voltage dip immunity of converter-connected distributed generation units 

Electromagnetic Transients of a Micro-Turbine Based Distributed Generation System 

An Integrated Hybrid Power Supply for Distributed Generation applications Fed by Nonconventional Energy Sources 

An Energy adaptive MPPT power management for micro-power vibration energy harvesting 

Photovoltaic-Battery-Powered DC Bus System for Common Portable Electronic Devices 

A Fast and Accurate Maximum Power Point Tracker for PV Systems 

A Simplified Series-Parallel Structure for the Regulated Peak Power Tracking (RPPT) System 

Harmonic Mitigation in AC“DC Converters for Vector Controlled Induction Motor Drives 

A Matlab/Simulink Model Based on power system block set-A new Direct Torque Control Strategy for Interior Permanent Magnet Synchronous Machine Drive System 

Fuzzy Logic Control of a Switched Reluctance Motor 

Direct Torque Control of a Permanent Magnet Synchronous Motor with Pulse Width Modulation using Fuzzy Logic

Electrical Engineering projects in Power Systems--part5

Matlab/Simulink Implementation for Reducing the Motor Derating and Torque Pulsation of Induction Motor using Matrix Converter 

The Use of Matrix Converters in Direct Torque Control of Induction Machines Simulink Implementation of Induction Machine Model “ A Modular Approach 
Analysis of Different Schemes of Matrix Converter with Maximum Voltage Conversion Ratio 
Power Flow Control with UPFC in Power Transmission System 
Analysis of a zero voltage switching Cuk converter 
Simulink model for economic analysis and environmental impact of a PV with diesel battery system for remote villages 
Analysis and modeling of unified power flow controller: Modification of Newton Raphson algorithm and user defined modeling approach power flow studies 
Wind driven self excited induction generator with voltage and frequency regulated by a reduced rating voltage source inverter 
A new fuzzy color correlated impulse noise reduction method 
Minimization of torque ripple in SRM drives 
A unified three phase transformer model for distribution load flow calculations 
Power flow control with UPFC in power transmission system 
Experiment on Fractional Frequency Transmission System 
A space Vector Modulation Scheme to Reduce Common Mode Voltage for Cascade Multilevel Inverters 

Analysis, Design and Implementation of modified single phase inverter 
Switching Frequency Imposition and Ripple Reduction in DTC Drives by Using Multilevel Converter 
Simultaneous Phase Balancing at Substations and Switches with Time-Varying Load Patterns 
Consideration of Input Parameter Uncertainties in Load Flow Solution of Three-Phase Unbalanced Radial Distribution System 

A Three-Phase Power Flow Method For Real-Time Distribution System Analysis 
novel Method of Load Compensation under Unbalanced and Distorted Voltages 
Development of Three-Phase Unbalanced Power Flow Using PV and PQ Models for Distributed Generation and Study of the Impact of DG Models 
Position Control Design Project (PD Controller “ Root “Locus Design) 
Application of Voltage- and Current- Controlled Voltage Source Inverters for Distributed Generation Systems 
Multi-Input Inverter for Grid-Connected Hybrid PV/Wind Power System 
Unified Power Flow Controller (UPFC) Based Damping Controllers for Damping Low Frequency Oscillations in a Power System 

Electrical Engineering projects in Power Systems--part4

PSCAD/EMTDC Simulation of Unified Series-Shunt Compensator for Power Quality Improvement 
Effects of Power Oscillations Damping Controllers by UPFC Using Different Fault Conditions 
Transient Stability Improvement of SMIB With Unified Power Flow Controller 
Control of Grid-interfacing Inverters with Integrated Voltage Unbalance Correction 
Three-Leg VSC and a Transformer Based Three-Phase Four-Wire DSTATCOM for Distribution Systems 
Modeling of a DSTATCOM with Ultra Capacitor Energy Storage for Power Distribution System Applications 
Control strategies for distribution static compensator for power quality improvement 
Optimization of PI Coefficients in DSTATCOM Nonlinear Controller for Regulating DC Voltage using Genetic Algorithm 
Operation and Control of Single Phase Micro Sources in a Utility Connected Grid 
Voltage Flicker Compensation using STATCOM 
A Novel Voltage-Boosting Converter with Passive Voltage Clamping 
Pulse Width Modulated Buck-Boost Five-Level Current Source Inverters 
Wound Rotor Induction Generator With Sensor less Control and Integrated Active Filter for Feeding Nonlinear Loads in a Stand-Alone Grid 
Optimum Control of Selective and Total Harmonic Distortion in Current and Voltage Under Non sinusoidal Conditions 
Filter based non-invasive control of chaos in Buck converter 
Voltage and Energy Utilization Enhancement in a Stand-alone WECS Using a Fuzzy Logic Controlled SPWM Converter Interface Scheme 
Hybrid Cascaded Multilevel Inverter with PWM Control Method 
Fuzzy Logic Based Control of Variable Speed Induction Machine wind Generation System 
ssss. Control of Three Phase, Four-Wire PWM Rectifier 
Switching losses and harmonic investigations in multilevel inverters 
Indirect Matrix Converter Based on Investigations of Field-oriented control for Induction Motor 
Two-stage Matrix Converter Used in Wind Power Generation System Application Research 
Development of a Grid “ Connected WIND/PV/BESS Hybrid Distributed Generation System 
Improvement of Voltage Stability and Reduce Power System Losses by Optimal GA based Allocation of Multi-type FACTS Devices 
Impacts of AC Generators and DSTATCOM Devices on the Dynamic Performance of Distribution Systems 
Digital Signal Controllers Improve Efficiency for Solar power Inverters 

Electrical Engineering Projects in Power Systems - part 3

Control and Analysis of a Unified Power Flow Controller 
Performance Analysis of Fuzzy Logic Based Unified Power Flow Controller 
Direct Power Control Strategies for Multilevel Inverter Based Custom Power Devices 
Switching Losses and Harmonic Investigations in Multilevel Inverters 
Modeling and Control of a Fuel Cell Based Z-Source Converter 
Fuzzy Control of Fuel Cell Distributed Generation Systems 
Intelligent Control of Fuel Cell Distributed Generation Systems 
Modeling and Control of Fuel Cell Based Distributed Generation Systems in a Standalone AC Power Supply 
A Low-Cost Inverter for Domestic Fuel Cell Applications 
Analysis and Design Considerations of Zero-Voltage and Zero-Current Switching (ZVZCS) Full-Bridge PWM Converters 
A Fast Space-Vector Modulation Algorithm for Multilevel Three-Phase Converters 
Fuzzy Logic Controller Based Three-phase Shunt Active Filter for Line Harmonics Reduction 
A Fuzzy-Controlled Active Front-End Rectifier with Current Harmonic Filtering Characteristics and Minimum Sensing Variables 
Model of Photovoltaic Module in MATLAB 
Power Quality Improvement Using DVR 
The use of Facts devices in disturbed Power Systems-Modeling, Interface, and Case Study 
A Novel Maximum Power Point Tracker for PV Panels Using Switching Frequency Modulation 
Single Phase Power Factor Correction: A Survey 
Modified SVPWM Algorithm for Three Levels VSI With Synchronized and Symmetrical Waveforms 
A Closed Loop Observer for Rotor Flux Estimation in Induction Machines 
Fuzzy Logic Speed Control of a DC Motor 
A New Topology for Unipolar Brushless DC Motor Drive with High Power Factor 
The Discontinuous Conduction Mode Sepic and Cuk Power Factor Preregulators: Analysis and Design 
Development of Low Cost Multi Phase Brushless DC (BLDC) Motors with Unipolar Current Excitations 
Direct Torque Control of Five-Phase Induction Motor Using Space Vector Modulation with Harmonics Elimination and Optimal Switching Sequence 
Optimal Placement of Shunt Connected Facts Device in a Series Compensated Long Transmission Line 

Electrical Engineering projects in Power Systems--part2

matlab/psb based modeling and simulation of 25 kv ac railway traction system- a particular reference to loading and fault conditions 
direct torque with fuzzy logic ripple reduction based stator flux vector control 
development of a slip and slide simulator for electric locomotive based on inverter controlled induction motor 
power quality analysis of traction supply systems with high speed train using active filters to reduce thd in traction systems 
optimized discontinuous pwm algorithm with variable load power factor for multilevel inverters 
novel direct power control for compensating voltage unbalance and load fluctuations in pwm rectifiers 
new dtc control scheme for induction motors fed with a three-level inverter 
sensor less speed estimation of induction motor in a direct torque control system 
mras based speed control of sensorless induction motor drives 
a novel technique for distribution system feeder reconfiguration 
power upgrading of transmission line by combining ac“dc transmission 
a single phase z-source cycloconverter (spzc) based on single phase matrix converter (spmc) topology with safe commutation strategy 
simulation of a space vector pwm controller for a three-level voltage fed inverter motor drive 
optimal intelligent controller for matrix converter induction motor drive system 
3-phase power factor correction, using vienna rectifier approach and modular construction for improved overall performance, efficiency and reliability 
a comparative study between two strategies for four-wire shunt active filter control 
A simple new control technique for unified power quality conditioner (upqc) 
direct power control for three-phase pwm rectifier with active filtering function 
space vector control of 5-phase pmsm supplied by 5 h-bridge vsis 
simulation and modeling of a dynamic voltage restorer. 
Dynamic modeling, design and simulation of a wind/fuel cell/ultra-capacitor-based hybrid power generation system 
sensor less control of interior permanent-magnet machine drives with zero phase lag position estimation 
torque-ripple minimization in switched reluctance machines over a wide speed range 
torque-ripple minimization in switched reluctance motors using adaptive fuzzy control 
simulink implementation of induction motor model 
improvement of voltage stability and reduce power system losses by optimal ga-based allocation of multi-type facts devices 
analytical modeling of hvdc transmission system converter using matlab/simulink 
a novel concept for mains voltage proportional input current shaping of a vienna rectifier eliminating controller multipliers 
sensor less control of interior permanent-magnet machine drives with zero-phase lag position estimation 
possibility of power tapping from composite ac“dc power transmission lines 
prediction-based ripple reduction in direct torque control of an induction machine 
prediction-based ripple reduction in direct torque control of an induction machine 
artificial neural network controlled shunt active power filter 
three-phase, power quality improvement ac/dc converters 
dtc-svm scheme for induction motors fed with a three-level inverter 
real and reactive power coordination for a unified power flow controller 

Electrical Engineering projects in Power Systems--part1

Programmable active power factor improvement scheme for single phase switch mode boost rectifiers 
svpwm techniques and applications in hts pmsm machines control 
space vector pulse width modulation of three level inverter extending operation into over modulation region 
 impact of reactive power in power evacuation from wind turbines 
transient fault response of grid connected wind electric generators 
pmsm speed sensor less direct torque control based on ekf 
zbus transmission network cost allocation 
electromagnetic interference with electronic apparatus by switching surges in gis “ cable system 
predictive valley current control for two inductor boost converter 
a modular fuel cell, modular dc“dc converter concept for high performance and enhanced reliability 
a simple control scheme for single-phase shunt active power filter with fuzzy logic based dc bus voltage controller 
a 24-pulse ac-dc converter employing a pulse doubling technique for vector controlled induction motor drives 
modeling of three levels converters used in electric traction 
harmonic current reduction in railway system 
second order sliding mode for traction control in ride-by-wire sport motorcycles 
a modular strategy for control and voltage balancing of cascaded h-bridge rectifiers 

Shodha 2k12 | Technical Fest

Event: Shodha 2k12 | Technical Fest

Organised by: Sree Chaitanya College of Engineering, Karimnagar, Andhra Pradesh

Key dates:
Fest dates: 21st-22nd September 2012
Last date: For Papers Its 31st of This Month and for Other Events on the SPOT at The College CAMPUS Only